31
Portable Base Section
Questions? Contact us at [email protected] or call (866) 325-8172
31
Questions? Contact us at [email protected] or call (866) 325-8172
Charging with the 6V Wall Charger
When using the 6V wall charger, you will need to bring the
6V Battery near an AC outlet. First connect the charger
into the wall. Next, clip the Red color-coded alligator clip
to the Red color-coded terminal on the battery. Then clip
the Black color-coded alligator clip to the Black color-
coded terminal on the battery.
A low battery takes approximately 10 hours to recharge.
14. Taking a Test Picture with a
Portable Base
You can remotely tell the camera to take a test picture
from the Portable Base by completing the following steps.
1. Press MENU button on the base. Use UP/DOWN
buttons until TAKPIC is displayed and then press SELECT.
2. Press UP/DOWN buttons to select the camera that you
want to take the picture. The camera number will be
shown in the upper right corner of the display.
3. Once the camera is selected, press SELECT button.
The base will send a command to the camera to take a
picture. During this process the display will show –WAIT-
message. When the picture has been taken the base will
display TAKEOK message.
15. Viewing your Pictures
If you are using a Portable Base and have not already
setup and connected the Memory Card Reader to your
computer, please refer to these steps located on page 4.
If you are using a PC Base, you will only need to click on
the View Pictures button in the PC Base software.
Windows XP
1.
Insert the Memory Card into the Memory Card Reader.
2.
Click the Start button and then click on My Computer.
Summary of Contents for RC-5000
Page 40: ...l l l l l 0 0 0 0 0 ...