12
PC Base Section
Questions? Contact us at [email protected] or call (866) 325-8172
12
Questions? Contact us at [email protected] or call (866) 325-8172
Each camera panel contains buttons and status indicators
displaying information on the status of the camera. Below
is a description of the buttons and status indicators.
Buttons
This requests a battery status and radio signal
from the camera. This may take several seconds. The
battery and signal status is displayed as shown to the
right. If for some reason the PC Base cannot
access the camera, No Communication is
displayed in the status window.
Commands the camera to take a picture.
Opens a folder in which pictures from that
camera are stored.
Click to unregister a camera from the PC Base
Modem. Once unregistered, a camera can be registered
with another PC Base or Portable Base or can be used in
Stand-Alone Mode (see page 17).
NOTE: Read
Section H
on page 16 for step-by-step direc-
tions to unregister a camera.
TIP: Check signal strength prior to unregistering.
Resets the Received Picture counter.
Status Indicators
Status Window
: (located above the Signal/Battery button)
This displays information from the last command given to
the camera or software.
Pics-On-Camera
: displays the number of pictures on the
camera that still need to be transmitted. When a picture
is transmitted from the camera to the PC Base, the
number is updated.
Receiving Picture
: Displayed when
receiving a picture from the camera
as shown to the right.
Summary of Contents for RC-5000
Page 40: ...l l l l l 0 0 0 0 0 ...