16
PC Base Section
Questions? Contact us at [email protected] or call (866) 325-8172
16
Questions? Contact us at [email protected] or call (866) 325-8172
CC:
If you want to send pictures to additional e-mail
addresses, enter the address here and then click the Add
button to add the address to the list who will receive the
e-mail. If you want to remove a name from this list, select
the name to remove and then click the Delete button.
Send Every:
Select the maximum number of pictures to
be attached to one e-mail. The second option that
becomes available allows you to choose the maximum time
interval the PC Base software waits before sending the
pictures.
For example, say you choose to send 5 pictures and you
select a time interval of 1 Hour. If the PC Base receives 5
pictures over a 40 minute period, the software will send an
e-mail with the 5 pictures attached. However, if the PC
Base only receives 3 pictures over a 1 Hour period, the
software will send an e-mail with the 3 picture attached.
H. Deleting a Camera from the PC Base
1.
Using the PC Base Software, press the
Signal/Battery
button to test the signal strength of the camera you
wish to delete. Make sure you can communicate with
the camera before you attempt to delete it.
Do not
proceed with deleting the camera from the software
until you have established communication. It is
best to have the camera right next to the PC Base
to eliminate any chances of the camera not being
deleted properly.
2.
Once you have established communication with the
camera, press the
Delete Camera
button for the
appropriate camera you wish to delete.
3.
The camera will automatically be removed from the PC
Base.
4.
Once the camera has been deleted, it is ready to be
added to another base (either PC or Portable) or used
in Stand-Alone Mode (see next section).
Summary of Contents for RC-5000
Page 40: ...l l l l l 0 0 0 0 0 ...