© 2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
51
SRE-1540 UL 06-18-2004
TROUBLESHOOTING
TROUBLESHOOTING
UNIT DOES NOT SHUT
OFF WHEN IT HITS THE
BUMPER AT THE END
OF THE RAIL
UNIT WILL NOT
OPERATE WITH
CALL / SEND
REMOTE
UNIT OPERATES
ERRATICALLY
OR
INTERMITTENTLY
WITH REMOTE
CALL/SEND
UNIT OPERATES
ERRATICALLY OR
INTERMITTENTLY
WITH A RIDER USING
THE
ARMREST MOUNTED
CONTROL SWITCH
This is correct lift operation.
A safety switch in the seat swivel prevents the unit from
operating with the seat "out of position".
UNIT WILL NOT
OPERATE UNLESS
THE SEAT IS
POSITIONED SO THAT
IT FACES THE OPEN SIDE
OF THE STAIRS
Change the delay setting on the receiver board to 900 mSec.
Reorient the transmitter (to point directly at the carriage).
Consult your dealer, an experienced technician or call
our Technical Service Department at 1-800-882-8768.
Check all safety mechanisms, including swivel seat
safety switch.
Wipe down rail.
Apply a small amount of grease to the
gear rack
only
.
Check swivel seat safety switch.
Check to see that the footrest safety tray is not dragging on
the stair nosing or hitting debris on the stairs.
If necessary, reposition the stair rail mounting brackets to
correct the problem.
Check the rail for debris that may bump safety switches
(footrest and carriage panels).
Check batteries in remote call/send unit.
Aim transmiter at the carriage
Transmitters must be `learned' to receiver.
ROUGH OR
CHATTERING RIDE
