© 2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1540 UL 06-18-2004
26
RESIDENTIAL
INFRARED CALL/SEND TRANSMITTER
The call/send system on the Bruno SRE-1550 is based on infrared (IR) controls,
the same type of control used for televisions and stereos.
Like a television remote, the SRE-1550 hand-held transmitter may experience
certain types of interference. Receivers are mounted on both sides of the SRE-1550
carriage to minimize interference.
Should interference occur, the unit will stop. This feature has been integrated
into the SRE-1550 to ensure your safety.
The direct line between the transmitter to either of the (2) transmitters should
be clear of obstacles for optimal operation. It may be necessary to reposition the transmitters
so that they are aimed at the carriage.
To reduce the possibility of interference:
While riding in the seat, ALWAYS operate the Elevator using the rocker switch
on the armrest.
Operating the SRE-1550 with a transmitter while riding in the seat
can lead to signal interference.
DO NOT mount the transmitters behind an obstacle such as a rail post.
DO NOT allow direct sunlight to shine on the receivers (blinding the receivers
on the carriage).
DO replace transmitter batteries regularly.
Depleted or nearly-depleted batteries alter the effective range of the transmitter.
DO keep the transmitter and receiver lens free of dirt and debris.
Use a non-abrasive cleaner suitable for glass or acrylic surfaces.
Do not use polishes or cleaning products containing wax. These products
will leave a film on the lens that will reduce the signal transmission range.
INSTALLATION
