© 2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
39
SRE-1540 UL 06-18-2004
LUBRICATION
Apply a light coating of white lithium
grease to the gear rack teeth only.
Installation Note:
Before tightening the
brackets, check to
make sure that the
bumper wires are not
trapped under the
bumper bracket at the
lower landing.
[ ] Install the upper bumper bracket to rail.
UPPER BUMPER BRACKET
[ ] Apply a thin coating of white lithium grease to the gear rack
TEETH ONLY
(see illustration below).
1 TUBE PER 16-FOOT UNIT
PRIOR TO LUBRICATION, run the carriage up and down the rail five to six (5-6) times.
This will clean the paint chips out of the gear rack. Vacuum or brush the gear rack and rail to
remove any paint chips loosened during this operation. Once the gear rack and rail are clean
and free of paint debris, proceed with lubrication.
INSTALLATION
NOTE: These instructions apply to
carriages with
nylon wheels.
If you are lubricating a carriage
with
steel wheels
, apply the
grease to the rail
and
the gear
rack teeth.
