© 2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1540 UL 06-18-2004
16
[ ] Assemble the rail joint by attaching the bottom plate to the
rail with the screws, lock washers and hex nuts provided with
the unit. Install the bolts, internal-tooth washers and hex nuts
through the joint blocks on both sides of the rail. Tighten all
bolts securely and make sure screw heads are flush with the
surface of the inside of the rail.
PLEASE REFER TO
EXPLODED VIEWS AT BACK OF MANUAL.
The chamfered edges of the holes
must face "up" toward the bottom
of the rail.
NOTE:
THE RAIL IS ALWAYS
INSTALLED WITH THE
GEAR RACK TOWARDS
THE CENTER OF THE
STAIRS AND GEAR TEETH
FACING WALL.
Once two sections of rail
are installed, and before
installing the carriage, run a
plomb line along the rail. If
the rail bows, insert shims
or readjust clamps.
INSTALLATION
RAIL JOINT ASSEMBLY - Residential and Commercial Units
