Bruker BioSpec 117 AVANCE III, Manual

Page: 76 / 102

76 ID: 182463115
Delivery and transport
▪ The magnet may only be lifted with hangers for heavy loads that are long enough for strong
sideways forces not to have any impact on the crane hooks. Alternatively, a special heavy
load frame can be used to lift the magnet.
▪ Moving on tank steel rollers or air pads within a building.
– The load-bearing capacity must be checked and guaranteed along the entire transport
route.
– The transport route must be smooth, free of joints and steps, and not have only a small
slope at most.
The following transport limitations should not be exceeded during any transport procedures:
Transport limitations [schreibgeschützt]
Transport limitations
Table 7.1: Transport limitations
If heavy duty rollers are used to transport the magnet in the air transport frame over short dis-
tances, these must be secured by bolts in the holes provided on the transport frame.
Transportation using heavy duty rollers
Figure 7.3: Transportation using heavy duty rollers
transport restrictions 117/16 USR Limit value
Maximum horizontal acceleration 2.0 g
Maximum vertical acceleration 3.0 g
Maximum duration during maximum acceleration 20 ms
Maximum tilt angle 10°
No sliding on loading surfaces. --
No contact with other transport goods --
Only gentile placement --
No tilting by more than 10° from vertical --
Maximum inclination along the transport route 15 mm/m