Bruker BioSpec 117 AVANCE III, Manual

Page: 78 / 102

78 ID: 182463115
Delivery and transport
Transport limitations [schreibgeschützt]
Transport limitations
Table 7.2: Transport limitations
7.5 Moving into the building
Before the MR instrument can be delivered and moved to the installation site, the load-bearing
capacity along the transport route must be calculated and verified by a qualified structural engi-
neer.
The building dimensions along the entire transport routes must be carefully checked and must
allow the transportation according to the transport requirements given below.
For that purpose, the transport weights of magnet and cabinets are provided in section
Surface
loads and weights [

47]
, the transport dimensions of the magnet is given in the figure below.
transport restrictions 117/16 USR Limit value
Maximum horizontal acceleration 2.0 g
Maximum vertical acceleration 3.0 g
Maximum duration during maximum acceleration 20 ms
Maximum tilt angle 10°
No sliding on loading surfaces. --
No contact with other transport goods --
Only gentile placement --
No tilting by more than 10° from vertical --
Maximum inclination along the transport route 15 mm/m
NOTICE
Hazard of crash or worse injury to hands or feet
Make sure that the occupational standards for minimum safety distances between building
structures and heavy loads are fulfilled along the entire transport route.