Bruker BioSpec 117 AVANCE III, Manual

Page: 89 / 102

ID: 182463115 89
Checklist for preparing to install the system
Operating area, area of the MR operating workstation:
Will the operating area be finished on time?
YES NO
Will the ceiling be finished on time?
YES NO
Will the floor be finished on time?
YES NO
Will the electrical installations be finished on time?
YES NO
Do both electrical 230V/10A sockets exist?
YES NO
Is the distance that the system cables must span to the electron-
ic cabinets less than 25 meters?
YES NO
Is the ventilation system ready?
YES NO
Are pictures or drawings of the operating area attached to this
checklist?
YES NO
If not, what are its inner dimensions?
(width × length × height)
______ x ______ x ______ cm
Will a desk and a chair be there at the time of installation?
YES NO
Technical room, area of the electrical cabinets:
Will the technical room be finished on time?
YES NO
Will the floor be finished on time?
YES NO
Will the electrical installations be finished on time?
YES NO
Will the cold water supply be ready for operation?
YES NO
Will the cooling system for the room be ready on time?
YES NO
Are pictures or drawings of the technical room attached to this
checklist?
YES NO
If not, what are its inner dimensions
(width × length × height)
______ x ______ x ______ cm
What is the length of the system cables between the electronic
cabinets and the magnet or the filter plate?
< 10 m < 18 m
Will all cable trays be installed at the time of the magnet instal-
lation?
YES NO