BRP Evinrude E-TEC Series, Service Manual, Page: 243 / 342

241
MIDSECTION
TILLER HANDLE SERVICE
11
•
Lock the retainer by moving the angled section
behind the straight section.
Pull firmly on shift cable casing to remove back-
lash.
With outboard and shift lever in NEUTRAL, place
shift cable on the trunnion bracket of intake mani-
fold as shown. Rotate the anchor to align.
Install washer between anchor and trunnion
bracket. Install screw. Tighten screw to a torque of
84 to 106 in. lbs. (9.5 to 12 N·m).
Throttle Cable Adjustment
Install throttle cable connector with Ball Socket
Installer tool, P/N 342225.
Place throttle cable through upper trunnion
pocket.
Hold twist grip in IDLE position. Pull firmly on
cable to remove backlash.
Locked Retainer Clip
1.
Angled section behind straight section
007465
2. Anchor 007466
3. Screw 007467
1
1
1
1. Installer tool, P/N 342225 007468
007469
1