BRP Evinrude E-TEC Series, Service Manual, Page: 112 / 342

110
ELECTRICAL AND IGNITION
ELECTRIC STARTER SERVICING
Apply Locquic Primer and Screw Lock to the
threaded portion, and install the two thru-bolts.
Tighten bolts to a torque of 100 to 110 in. lbs. (11
to 12.5 N·m).
Lubricate the splines (helix) of starter pinion shaft
with
Starter Bendix Lube . DO NOT use liquid or
aerosol spray lubricants.
Install pinion, spacer and spring.
Install spacer and retaining nut. Tighten nut to a
torque of 20 to 24 ft. lbs. (27 to 33 N·m).
Be sure spacer is not caught between shaft and
retaining nut and that spacer is free to move.
To test the assembly and operation of the starter,
refer to
No Load Current Draw Test on p. 97.
002306
002307
007440
007441
007442