BRP Evinrude E-TEC Series, Service Manual, Page: 136 / 342

134
FUEL SYSTEM
FUEL COMPONENT SERVICING
Crush Ring Replacement
Injector crush rings must be
replaced if injector is installed in a different
head or cylinder location.
Use Slide Hammer assembly, P/N 391008, with
Slide Hammer Adaptor kit, P/N 390898, to remove
injector from mounting cup.
Thread adaptor and stud into face of injector. Hold
mounting cup securely. Use slide hammer to sep-
arate injector from mount housing.
Remove adaptor from injector. Remove crush ring
and O-rings from injector. Inspect and clean injec-
tor filter. Install new crush ring and O-rings. Lubri-
cate O-rings with
STP
†
Oil Treatment .
Install injector into mount housing. Press on injec-
tor face until injector seats in mount housing.
002345
1. Adaptor 007424
NOTICE
1
1. Crush ring
2. O-rings
002317
007425
2
1