BRP Evinrude E-TEC Series, Service Manual, Page: 157 / 342

155
OILING SYSTEM
OIL COMPONENT SERVICING
8
Install cylinder #2 oil distribution hose to the out-
board (furthest from powerhead) oil manifold port.
Refer to OIL SUPPLY DIAGRAMS on p. 143.
Oil Tank Assembly
Removal
Disconnect the battery cables at the battery.
Disconnect the electrical connector to the oil injec-
tion pump.
Disconnect the electrical connector to the low oil
switch.
IMPORTANT:
Note oil distribution hose rout-
ings before proceeding with disassembly.
Remove oil distribution hoses from the manifold.
Remove oil tank retaining screw.
1. Hose retainer
2. Oil distribution manifold
3. Crankcase oil supply hose
4. Cylinder block oil supply hose
007334
1. Hose retainer
2. Oil distribution manifold
3. #1 Cylinder
4. #2 Cylinder
5. Crankcase
6. Cylinder block
007335
2
4
3
1
2
3
4
1
3
4
6 5 5 6
1. Oil pump connector
2. Low oil switch
007336
1. Screw 007288
1
2
1