BRP E200DHLSEB, Service Manual

Page: 318 / 412

316
GEARCASE – STANDARD ROTATION
GEARCASE ASSEMBLY
gearcase. Align and level gearcase assembly in
fixture as shown. Secure fixture to floor press.
Housing must be completely seated in gearcase
to install retainer screws. Bearing housing is
approximately level with gearcase.
Apply
Ultra Lock
to threads and install two retain-
ing screws. Tighten screws to a torque of 18 to 20
ft. lbs. (24 to 27 N·m).
Final Assembly and Adjustment
To complete gearcase assembly, refer to:
•
GEARCASE LEAK TEST
on p. 286
•
WATER PUMP SERVICE
on p. 290
•
SHIFT ROD ADJUSTMENT
on p. 294
•
GEARCASE REMOVAL AND INSTALLA-
TION
on p. 287
•
Gearcase Lubricant
on p. 79
•
Propeller Hardware Installation
on p. 67
•
Trim Tab Adjustment
on p. 70
1. Gearcase fixture, P/N 354059
2. Vertical alignment screws
3. Handle P/N 345822
4. M2 Adapter P/N 353057
006927
006928
2
3
4
1
1. Retainer screws
006835
1