3. INSTALLATION
RH-9820
26
3-17. Installing the eye guard
CAUTION
Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.
(1) Eye guard assembly
(2) Plain washers [2 pcs.]
(3) Screws [2 pcs.]
3-18. Installing the dust bag
1. Install the hook (1) underneath the table in a
convenient-to-use position.
2. Install the dust bag (2) to the hook (1).
3. Open the chuck of the dust bag (2) and insert the venturi
tube (3).
4. Close the chuck.
The longer the distance [A] from the bottom of the dust bag to
the venturi tube (3), the greater the amount of cutting scraps
that the dust bag can hold. To increase the amount of cutting
scraps that can be held, adjust so that the distance [A]
becomes longer.
Cut the knife trash tube (4) and air tube (5) shorter if
necessary.
* The efficiency for sucking in the cutting scraps will
increase if the knife trash tube (4) and air tube (5) are
made shorter.
NOTE:
Throw away the cutting scraps before they reach the tip
of the venturi tube (3). If they cover the tip of the venturi
tube, the inside of the knife trash tube (4) will become
blocked.
0377B
1596B
1597B
1598B
