9. STANDARD ADJUSTMENTS
RH-9820
89
<Forward/back position adjustment>
<For -00, -01, -02-L2634/L3442 specifications> <For -02-L1422/L1826/L2230 specifications>
8. Loosen the socket bolt (4) and the screw (5), and move the knife position forward or back to adjust.
9. Once the knife position has been determined, securely tighten the socket bolt (4).
10. Push the block stopper plate (6) against the knife, and then tighten the screw (5).
* The block stopper plate (6) is a guide for showing the current position of the knife, so be sure to move the block stopper
plate (6) so that it is touching against the knife.
<Tilt adjustment>
11. Loosen the socket bolts (7), (8) and (9).
12. Turn the eccentric pin (10) to adjust.
* Make fine adjustments by turning centering on the pivot
(11).
13. Once adjustment is complete, tighten the socket bolts (9),
(8) and (7) in that order.
(Seen from directly above the knife base)
0557B
0556B
0558B
