7. USING THE SEWING MACHINE (OPERATION PANEL: ADVENCED OPERATION)
㩷
RH-9820
58
3
Switch to cycle program mode.
(1) Cycle program number
(2) Step number
(3) Contents (program number, cutting operation) set for the
selected step number 1
4
Set the contents (3) for step 1 to “P01”.
*
The “_” in “P” means that cutting operation is set to be on.
* The “--” in “P--” means that no setting has been made.
When “--” is set, the contents for all subsequent steps are
cleared.
5
Apply the changed contents.
The contents (3) for step 1 will change from flashing to steadily illuminated.
6
Set the step number (2) to “2”.
7
Repeat steps 4 and 5 above to set the contents for step 2 of the cycle program to “P01”, the same contents as for step 1.
8
Set the step number (2) to “3”.
9
Repeat steps 4 and 5 above to set the contents for step 3 of the cycle program to “P01”, the same contents as for step 1.
(Continued on next page)
0413B
0415B
(1)
(2)
(3)
0263B
(3)
0237B
0414B
0238B
(2)
0239B
(2)
0413B
