3. INSTALLATION
RH-9820
10
3-4-2. When embedding into the table
(1) Bed support plates [4 pcs.]
(2) Bolts [16 pcs.]
* Install so that they are horizontal to
the bed base.
NOTE:
•
When placing the machine head
onto the table, have four or more
people hold the machine head by the
places indicated by the
locations
in the illustration.
•
Do not hold by the head support
lever (3).
(4) Rubber sheets [12 pcs.]
(5) Bolts [4 pcs.]
(6) Washers (large) [4 pcs.]
(7) Nuts [4 pcs.]
After installing the machine head,
remove the fixing bolt (8).
Tilt back the machine head and install
the rubber caps (9) to the four holes in
the bed base.
NOTE:
The fixing bolt (8) is needed when
moving the machine head, so store
it in a safe place.
Be sure to use the rubber sheets (4).
If they are not used, the amount of
vibration will be excessive.
0347B
1642B
1650B
1651B
(rear)
