9. STANDARD ADJUSTMENTS
RH-9820
111
(Top)
12. Route the tubes as shown in the illustration, and then connect the air hose (9) to the joint (4) and the air hose (10) to the
joint (5).
13. Secure the air hoses (9) and (10) in four places using the four bead bands (17) as shown in the illustration.
Work clamp plate R assembly
(Viewed from the underside)
14. Loosen the socket bolt (18), and then remove the auxiliary clamp assembly (19).
15. Remove the spring (20).
16. Remove retaining ring C (21), and then remove the auxiliary clamp arm (22).
17. Remove retaining ring C (23), loosen the two set screws (24), and then remove clamp fulcrum shaft J (25) in the direction
of the arrow.
1171B
1172B
