Brother PE-Design Next Instruction Manual Download Page 69

Page: 69 / 320

Editing a Stitch Pattern

Lay

out &

Edit

ing

Ope

rat

ions

To select a single stitch point, click an empty
square.

■

Moving stitch points

Drag the selected stitch points to the new location.

■

Inserting stitch points

Click a line between two stitch points to add a new
point at that position.

■

Deleting stitch points

Press the

key to delete the selected stitch

point.

Converting a stitch pattern
to blocks

Stitch pattern can be converted into blocks (manual
punching data).

“Manually Creating Professional-Level
Embroidery Patterns (Manual Punching)”
on page 148.

Select the stitch pattern(s), and then click

then

Memo:

• When selecting stitch points, be sure to

click the stitch point (do not click a blank
area of the Design Page), otherwise all of
the selected points will be deselected.

• If you click on a jump stitch, the points at

both ends are selected.

• Multiple stitch points can be selected in the

same way that embroidery pattern points
are selected.

“Selecting points” on page 62.

• Press the

key.



All stitch points in the next color are
selected.

• Press the

and

keys.



All stitch points in the previous color
are selected.

• Press the

and

keys.



The entry point of the first thread color
is selected.

• Press the

and

keys.



The exit point of the last thread color
is selected.

• Select at least one point in a given color,

and then press the

key.



The entry point of the color is
selected.

• Select at least one point in a given color,

and then press the

key.



The exit point of the color is selected.

Note

Stitch points cannot be edited if the pattern is
not a stitch pattern. The pattern can be
viewed in Solid View.

Memo:

Stitch points are moved in the same way that
embroidery pattern points are moved.

“Moving points” on page 62.

Selected point

Unselected point

Tab

Shift

Tab

Ctrl

Home

Ctrl

End

Home

End

Memo:

• If the end point of a jump stitch is deleted,

that jump stitch segment is deleted and the
stitches before and after the jump stitch are
connected.

• To insert a stitch point and change the

previous line into a jump stitch, hold down

the

and

keys while clicking

on the line.

Delete

Ctrl

Shift

XE8656-001.book Page 67 Monday, May 24, 2010 5:44 PM

Summary of Contents for PE-Design Next

































































































































































































































































































































Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands

Brother PE-Design Next, Instruction Manual

Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands