Brother PE-Design Next Instruction Manual Download Page 63

Page: 63 / 320

Applying Sewing Attributes to Lines and Regions

Lay

out &

Edit

ing

Ope

rat

ions

■

Editing a stamp

Click

, then

Click the object with the stamp.



“Marching lines” appear around the
selected object.

Click the stamp.

Edit the stamp.

• To change the stamp pattern, select a

different pattern, and then click

Apply

Memo:

• Only one stamp can be selected at a time.
• To enlarge the pattern, drag a scale handle.
• To rotate the pattern, drag the rotation

handle.

• To delete the pattern, press the

key.

Scale
handles

Rotation handle

Delete

Memo:

• If the size of a pattern is changed, the size

of the stamp does not change. Be sure to
check the stamp after editing a pattern.

• If a pattern containing a stamp is edited, be

sure to check the stamp after editing is
finished.

le_basic.fm Page 61 Thursday, May 27, 2010 8:18 PM

Summary of Contents for PE-Design Next

































































































































































































































































































































Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands

Brother PE-Design Next, Instruction Manual

Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands