Brother PE-Design Next Instruction Manual Download Page 236

Page: 236 / 320

234

Creating Fill/Stamp Stitch Pattern

Select the drive and folder where the pattern
was saved in Step 4.

Click the edited fill/stamp stitch pattern, and
then click



The pattern is applied to the inside
regions of the embroidery pattern.

Memo:

• A fill/stamp stitch pattern can also be

applied as a stamp by using the Stamp
Tools.

“Applying and editing stamps” on
page 60

• For best results, refer to “Notes on

programmable fill stitches and stamps” on
page 305.

XE8656-001.book Page 234 Monday, May 24, 2010 5:44 PM

Summary of Contents for PE-Design Next

































































































































































































































































































































Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands

Brother PE-Design Next, Instruction Manual

Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands