Brother PE-Design Next Instruction Manual Download Page 258

Page: 258 / 320

256

Selecting a Character and Preparing the Template

Selecting a Character and Preparing the
Template

Selecting the character to
be created

■

Selecting from the selector

Click the left or right arrow buttons of the

Select

Character

box to select a character before or after

the one that is currently displayed.

■

Selecting from a character list

Click

, then Select Character box

(2)

Click the character to be created.

■

Adding/deleting registered
characters

Click

, then

From the keyboard, enter the character to be
registered.

Click

Add

Memo:

• Characters where pattern has already been

created appear with a blue background.

• The blank box in the upper-left corner is a

space. Click this box to select a space.

Note:

If any part of the character pattern extends
off the Design Page when a different
character is selected, a message appears.
Before selecting a different character, edit
the character pattern so that no part extends
off the Design Page.

XE8656-001.book Page 256 Monday, May 24, 2010 5:44 PM

Summary of Contents for PE-Design Next

































































































































































































































































































































Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands

Brother PE-Design Next, Instruction Manual

Search results

Summary of Contents for PE-Design Next

Reviews:

Related manuals for PE-Design Next

Brands by name

Popular brands