manualshive.com logo in svg

Brother MFC-5200C, Service Manual

Share
Download
Brother MFC-5200C Service Manual Download Page 208

8 - 2 4

[ 7 ]

SmartMedia-, Compact Flash-, or Memory Stick-driven printing

Trouble

Check:

(1) No image data can be read.

• Insertion direction of SmartMedia, Compact Flash, or Memory

Stick card

- Insert a SmartMedia or Memory Stick card with the cutout

corner leading and facing down.

- Insert a Compact Flash card with the label side facing towards

the left.

• SmartMedia, Compact Flash, or Memory Stick

- Formatted?
- Any data in the media?
- Images stored in the media are in EXIF2.0-compliant JPEG
  file format (having extension .JPG)?

• Media PCB

• Media flat cables

• Main PCB

(2) No SmartMedia can be

recognized.

• Check whether any other memory cards are already inserted.

If not, refer to item (1) above.

(3) Media printing is impossible.

• Check whether the memory is full.

(4) No Memory Stick can be

recognized.

• Check whether you inserted a Memory Stick pro card that

cannot be used in this machine.

Summary of Contents for MFC-5200C







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands