manualshive.com logo in svg

Brother HL-L8260CDN, Online User'S Manual

Share
Download
Brother HL-L8260CDN Online User'S Manual Download Page 266

Error Message

Cause

Action

No Paper

The machine is out of paper, or
paper is not loaded correctly in the
paper tray.

•

Refill paper in the paper tray. Make sure
the paper guides are set to the correct size.

•

If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.

•

Do not overfill the paper tray.

No Paper Fed Tray1
No Paper Fed Tray2
No Paper Fed Tray3
No Paper Fed Tray4

The machine failed to feed paper
from the indicated paper tray.

Pull out the paper tray indicated on the LCD
and remove all jammed paper.

No Paper MP

The MP tray is out of paper, or
paper is not loaded correctly in the
MP tray.

Do one of the following:
•

Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.

•

If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.

No Paper Tray1
No Paper Tray2
No Paper Tray3
No Paper Tray4

The machine failed to feed paper
from the indicated paper tray.

Do one of the following:
•

Refill paper in the paper tray indicated on
the LCD. Make sure the paper guides are
set to the correct size.

•

If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.

•

Do not overfill the paper tray.

No Toner

The toner cartridge for the colour
indicated on the LCD is not
installed or not installed correctly.

Remove the toner cartridge for the colour
indicated on the LCD from the drum unit, and
put the toner cartridge back into the drum unit.
If the problem continues, replace the toner
cartridge.

No Tray1
No Tray2
No Tray3
No Tray4

The paper tray is not installed or
not installed correctly.

Reinstall the paper tray indicated on the LCD.

No Waste Toner

The waste toner box is not
installed or not installed correctly.

Reinstall the waste toner box.

Out of Memory

The machine’s memory is full.

Press 

 and reduce the print resolution.

Paper Low
Paper Low Tray 1
Paper Low Tray 2
Paper Low Tray 3
Paper Low Tray 4

The paper tray is nearly empty.

Refill the paper in the paper tray indicated on
the LCD.

Print Data Full

The machine’s memory is full.

Press 

 and delete the previously stored

secure print data.

Print Unable

 ##

The machine has a mechanical
problem.

•

Press and hold 

 to turn the machine off,

wait a few minutes, and then turn it on
again.

•

If the problem continues, contact Brother
customer service.

261

Summary of Contents for HL-L8260CDN






















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands