manualshive.com logo in svg

Brother HL-L8260CDN, Online User'S Manual

Share
Download
Brother HL-L8260CDN Online User'S Manual Download Page 209

•

To enable IEEE 802.1x authentication for wired networks, select 

Enabled

 for 

Wired 802.1x status

 on

the 

Wired 802.1x Authentication

 page.

•

If you are using 

EAP-TLS

 authentication, you must select the client certificate that has been installed

(shown with certificate name) for verification from the 

Client Certificate

 drop-down list.

•

If you select 

EAP-FAST

, 

PEAP

, 

EAP-TTLS

, or 

EAP-TLS

 authentication, select the verification method

from the 

Server Certificate Verification

 drop-down list. Verify the server certificate using the CA

certificate, imported to the machine in advance, that has been issued by the CA that signed the server
certificate.

Select one of the following verification methods from the 

Server Certificate Verification

 drop-down list:

Option

Description

No Verification

The server certificate can always be trusted. The verification is not performed.

CA Cert.

The verification method to check the CA reliability of the server certificate, using the
CA certificate that has been issued by the CA that signed the server certificate.

CA Cert. + ServerID

The verification method to check the common name

 1

 value of the server certificate,

in addition to the CA reliability of the server certificate.

7. When finished with configuration, click 

Submit

.

For wired networks: After configuring, connect your machine to the IEEE 802.1x supported network. After a
few minutes, print the Network Configuration Report to check the <

Wired IEEE 802.1x

> Status.

Option

Description

Success

The wired IEEE 802.1x function is enabled and the authentication was successful.

Failed

The wired IEEE 802.1x function is enabled; however, the authentication failed.

Off

The wired IEEE 802.1x function is not available.

  Related Information

•

Use IEEE 802.1x Authentication for a Wired or a Wireless Network

 

1

The common name verification compares the common name of the server certificate to the character string configured for the 

Server ID

.

Before you use this method, contact your system administrator about the server certificate's common name and then configure 

Server ID

.

204

Summary of Contents for HL-L8260CDN






















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands