Brother HL-L8260CDN Online User'S Manual Download Page 112

Page: 112 / 405

Home >

Network

Additional Methods of Configuring Your Brother Machine for a Wireless Network

Use

Wi-Fi Direct

Configure Your Wi-Fi Direct Network

> Configure Your Wi-Fi Direct Network Using the PIN

Method

Configure Your Wi-Fi Direct Network Using the PIN Method

Related Models

: HL-L8260CDW/HL-L8360CDW/HL-L9310CDW

>> HL-L8260CDW
>> HL-L8360CDW/HL-L9310CDW

HL-L8260CDW

If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
1. Press

to select the

[Network]

option, and then press

2. Press

to select the

[Wi-Fi Direct]

option, and then press

3. Press

to select the

[PIN Code]

option, and then press

4. If

[Wi-Fi Direct On?]

appears, press

to accept. To cancel, press

5. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when

[Activate Wi-Fi Direct on other device and press OK.]

appears on the machine's LCD.

Press

on your machine.

This will start the Wi-Fi Direct setup. To cancel, press

Back

6. Do one of the following:

•

When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your
mobile device. When

[Input PIN Code]

appears, enter the PIN displayed on your mobile device in the

machine. Press

to complete the setup.

If the PIN is displayed on your Brother machine, enter the PIN in your mobile device.

•

When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Press

to select the mobile device you want to connect to and press

Search for available devices again by pressing

[Rescan]

, and then go to the next step.

7. Do one of the following:

•

Press

to display the PIN on your machine, enter the PIN in your mobile device, and then go to the next

step.

•

Press

to enter a PIN displayed by your mobile device in the machine. Press

, and then go to the next

step.
If your mobile device does not display a PIN, press

Cancel

on your Brother machine. Go back to the first

step and try again.

8. If your mobile device connects successfully, the machine's LCD displays

[Connected]

. You have completed

the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on
printing from your mobile device. Go to your model's

Manuals

page on the Brother Solutions Center at

support.brother.com

to see the guide.

HL-L8360CDW/HL-L9310CDW

If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:

When the machine receives the Wi-Fi Direct request from your mobile device, the message

[Wi-Fi

Direct connection request received. Press [OK] to connect.]

will appear on the LCD.

Press

[OK]

to connect.

1. Press

[Settings]

[All Settings]

[Network]

[Wi-Fi Direct]

[PIN Code]

107

Summary of Contents for HL-L8260CDN





















































































































































































































































































































































































































Search results

Summary of Contents for HL-L8260CDN

Reviews:

Brands by name

Popular brands

Brother HL-L8260CDN, Online User'S Manual

Search results

Summary of Contents for HL-L8260CDN

Reviews:

Brands by name

Popular brands