Brother GTX pro, Instruction Manual, Page: 318 / 356

318
Error message
Error code Error message Description Remedy Reference
2095
[Ink Pouch Error
White 34]
An error has been
detected in the white
34 ink pouch.
In that case, replace with a new
ink pouch set.
-
2100
[USB flash drive Not
Ready]
No USB flash memory
been inserted into its
insertion slot.
Insert a USB flash memory into
the slot, wait for a couple of
seconds, and perform the
operation.
Insert a USB flash memory into
the slot again.
If the problem still persists, check
on the format and type of the USB
flash memory. "9-1. Troubleshooting
instructions >>P.248"
2101 [Not Enough Area]
At the writing stage to
the USB flash
memory there is not
enough free space to
store the data. Use your PC to check free space
on the USB flash memory.
Insert the USB flash memory that
has enough free space into the
insertion slot. -
2105 [No Files]
No valid file exists in a
USB flash memory.
Connect the USB flash memory to
your PC for checking the
information stored in it.
If an ARXP or ARX4 file has been
saved to it, check its content by
means of the file viewer. "9-1. Troubleshooting
instructions >>P.248"
2110
[Receiving History
W/O Error1]
After the power is
turned on, it is found
that there is no print
data received.
Press to clear the error.
-
2120
[Print Data Auto
Delete Enable]
Because the Print
Data Auto Delete
Enable function
remains active, no
receiving history is
available.
Press to clear the error.
When you use the receiving
history, disable the Auto Job
Delete option.
-
2130
[White Ink Pause
Mode…
Non-performable]
Because the White
Ink Pause Mode
remains active, no
white ink can be
installed.
Press to clear the error.
When you use the white ink, do
not make the White Ink Pause
Mode active.
-
2200
[Maintenance Pouch
Set Black]
Although an ink pouch
is needed, a
maintenance solution
pouch is set to the
black cartridge.
Set an ink pouch to the black
cartridge.
-