Brother FAX-1355, User Manual

Page: 65 / 127

Remote fax options
55
10
Remote fax commands
10
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by
l
), the system will give
two short beeps and you must enter a remote command.
Remote commands Operation details
91 Playing Voice messages
(FAX-1460 and FAX-1560)
After one long beep, the machine plays the ICMs.
1 Repeat or Skip Backward Press 1 while listening to an ICM to repeat it. If you press 1
before a message, you will hear the previous message.
2 Skip Forward While playing the ICM, you can skip to the next message.
9 STOP Playing Stop Playing the ICM.
93 Erase all ICM
(FAX-1460 and FAX-1560)
If you hear one long beep, the erase is accepted. If you hear
three short beeps, you cannot erase the ICMs because all
voice messages have not been played or there are no voice
messages to erase.
*This code erases all recorded messages, not one at a time.
94 Play and Record OGM in Memory
(FAX-1460 and FAX-1560)
1 Play 1 Msg Ctr OGM The machine plays the selected OGM. You can stop playing
OGMs by pressing
9 .
2 F/T OGM
2 Record 1 Msg Ctr OGM After one long beep, you can record the selected OGM. You
will hear the message played once. You can stop recording
the message by pressing
9 .
2 F/T OGM
95 Change the Fax Forwarding or Fax
Storage settings
1 OFF You can choose
Off
after you have retrieved or erased all
your messages.
2 Fax Forwarding If you hear one long beep, the change has been accepted.
If you hear three short beeps, you cannot change it because
something has not been set up (for example, registering a
Fax Forwarding number). You can register your Fax
Forwarding number by entering 4. (See
Changing your Fax
Forwarding number on page 54.)
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to receive stored
fax messages. (See
Retrieving fax messages on page 53.)
3 Erase faxes from the memory If you hear one long beep, fax messages have been erased
from the memory.
97 Check the receiving status
(FAX-1355 and FAX-1360)
1 Document You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.