Brother FAX-1355 User Manual Download Page 57

Page: 57 / 127

TAD-Mode for internal

TAD

The TAD feature will store up to 99 incoming
voice messages. Messages are stored in the
order in which they are received.

Voice messages can be up to 3 minutes in
length, and can also be picked up remotely.
(See

Setting a Remote Access

Code

on page 52.) The number of messages

you can store will depend on how much
memory is being used by other features (for
example, delayed and stored faxes).

In the event of a power failure your machine
will retain messages that are in the memory
for up to 24 hours.

Setting up the TAD

Recording the TAD outgoing message
(

TAD Message

) is the first step you need to

follow before you can use the TAD feature.

To enter TAD mode, follow the steps below:

Record your TAD OGM.

Press

to activate the TAD mode.

Outgoing message (OGM)

Recording your OGM

You can record the following two different
types of OGM:

Your OGM must be less than 20 seconds
long.

Press

Menu

The LCD prompts you to choose an
OGM.

Press

to choose

TAD Message

F/T Message

then press

Press

to choose

Record MSG

Press

Record your message, do one of the
following:

(FAX-1460) Pick up the handset,
record your message and replace
the handset when you are finished.

(FAX-1560) Speak clearly toward the

integrated microphone

to record

your message. Press

Stop/Exit

when finished.

The TAD will play your OGM back to
you.

Press

Stop/Exit

Digital TAD

(FAX-1460 and FAX-1560)

TAD

This message will be played when a
call is received. The caller will be
able to leave a voice or fax message.

F/T

This message is played when a call
is received and your machine is set
to Fax/Tel mode. The caller will

not

be able to leave a message. See
page 48.

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands