Brother FAX-1355 User Manual Download Page 40

Page: 40 / 127

Chapter 6

Using receive modes

Some receive modes answer automatically
(

Fax Only

and

Fax/Tel

). You may want to

change the ring delay before using these
modes. See

Ring Delay

on page 31.

Fax only

The

Fax Only

mode will automatically

answer every call. If the call is a fax your
machine will receive it.

Fax/Tel

The

Fax/Tel

mode helps you automatically

manage incoming calls, by recognising
whether they are fax or voice calls and
dealing with them in one of the following
ways:

Faxes will be automatically received.

Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double ring made by your machine.

Also see

F/T Ring Time (Fax/Tel mode only)

and

Ring Delay

on page 31.

Manual

The

Manual

mode turns off all automatic

answering functions unless you are using the
BT Call sign feature or you are using an
external TAD with the FAX-1460 and
FAX-1560.

To receive a fax in manual mode press

Start

when you hear fax tones (short repeating
beeps). You can also use the Fax Detect
feature to receive faxes by lifting a handset on
the same line as the machine.

Also see

Fax Detect

on page 31.

TAD (

TAD:Msg Mgr

)

(FAX-1460 and FAX-1560)

TAD (

TAD:Msg Mgr

) helps you

automatically manage incoming calls, by
recognising whether they are fax or voice
calls and dealing with them in one of the
following ways:

Faxes will be automatically received.

Voice callers can record a message.

To set up the

TAD:Msg Mgr

mode see

page 47.

External TAD
(FAX-1355 and FAX-1360)

The

External TAD

mode lets an external

answering device manage your incoming
calls. Incoming calls will be dealt with in one
of the following ways:

Faxes will be automatically received.

Voice callers can record a message on the
external TAD.

For more information see

Connecting an

external TAD (telephone answering
device)

on page 38.

If TAD Mode is On, it will override
your receive mode setting. The
screen shows

TAD:Msg Mgr

If TAD Mode is Off, the receive mode
returns to your original setting. (See

TAD-Mode for internal
TAD

on page 47.)

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands