Brother FAX-1355 User Manual Download Page 80

Page: 80 / 127

Choosing a location

Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put
the machine near a telephone socket and a standard electrical socket. Choose a location where
the temperature remains between 10

and 35

C (50

F and 95

F).

CAUTION

• Avoid placing your machine in a high-traffic area.

• Avoid placing your machine on a carpet.

• DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment,

chemicals or water.

• DO NOT expose the machine to direct sunlight, excessive heat, moisture, or dust.

• DO NOT connect your machine to electrical sockets controlled by wall switches or automatic

timers.

• Disruption of power can wipe out information in the machine's memory.

• DO NOT connect your machine to electrical sockets on the same circuit as large appliances

or other equipment that might disrupt the power supply.

• Avoid interference sources, such as other cordless telephone systems or speakers.

• DO NOT place the FAX-1560 and cordless handset near electro-medical equipment.

Safety and Legal

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands