Brother FAX-1355 User Manual Download Page 44

Page: 44 / 127

Voice Operations

Voice calls can be made either with the
handset (FAX-1360 and FAX-1460), cordless
handset (FAX-1560), the speaker phone
(FAX-1460 and FAX-1560), an extension or
external telephone, by dialing manually or by
using Quick-Dial numbers.

Note

If you have FAX-1560, please also refer to
the DECT™ Handset User’s Guide.

Making a telephone call
(Not for FAX-1355)

To start a voice call, choose one of the
options below:

Pick up the handset.

Press

Speaker Phone

When you hear the dial tone, enter a
number using the dial pad, One Touch,
Speed-Dial or Search.

If you pressed

Speaker Phone,

speak

clearly toward the microphone

To hang up, choose one of options
below:

Replace the handset.

Press

Speaker Phone

Answering calls with the
Speaker Phone
(FAX-1460 and FAX-1560)

When the machine rings, instead of lifting the
handset, press

Speaker Phone

. Speak

clearly toward the microphone

. To end the

call, press

Speaker Phone

Mute (Not for FAX-1355)

(FAX-1360 and FAX-1460)

Press

Mute

to put a call on hold. You

can replace the handset without
disconnecting the call.

Pick up the machine’s handset to
release the call from hold.

(FAX-1560)

If you answered by pressing

Speaker Phone

on the machine, press

Mute/Intercom

on the machine to put a

call on hold.

Press

Speaker Phone

to release the

call from hold.

Telephone and External devices

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands