Brother FAX-1355 User Manual Download Page 37

Page: 37 / 127

Sending a fax

Sending a fax at the end of a
conversation

At the end of a conversation you can send a
fax to the other party before you both hang up.

Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.

Make sure you are in Fax mode

Load your document.

Press

Start

If you picked up the handset, replace it.

Out of Memory message

If you get an

Out of Memory

message

while scanning the first page of a fax, press

Stop/Exit

to cancel the fax.

If you get an

Out of Memory

message

while scanning a subsequent page, you will
have the option to press

Start

to send the

pages scanned so far, or to press

Stop/Exit

to cancel the operation.

Note

If you get an

Out of Memory

message

while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See

Real time transmission

on page 25.)

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands