Brother FAX-1355 User Manual Download Page 90 | Manualshive

Page: 90 / 127

background image

80

Error messages

B

As with any sophisticated office product, errors may occur. If this happens, your machine identifies
the error and shows an error message. The most common error messages are shown below.

You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers
the latest FAQs and troubleshooting tips.

Visit us at http://solutions.brother.com.

Copying Difficulty

Difficulty

Suggestions

Cannot make a copy

Make sure that the Copy

key is illuminated. (See

Entering Copy

Make sure the panel cover is completely closed.

Vertical streaks appear in copies

If you see vertical streaks on copies, clean the scanner. (See

Error Message

Cause

Action

BT Call Sign On

(For UK only)

BT Call Sign is set to ON. You
cannot change the Receive Mode
from Manual to another mode.

Set BT Call Sign to OFF. (See

BT Call Sign (For

Change Unable XX

Clean Unable XX

The machine has a mechanical
problem.

—OR—

A foreign objects such as a clip or
ripped paper is in the machine.

Open the Upper Jam Clear Cover and remove
any foreign objects inside the machine.

(FAX-1355 and FAX-1360) If the error message
continues, see

Transferring your faxes or Fax

Journal report

on page 82 before disconnecting

the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.

(FAX-1460 and FAX-1560) Disconnect the
machine from the power for several minutes,
then reconnect it. (The machine can be turned
off for up to 24 hours without losing faxes stored
in the memory.)

Comm.Error

Poor phone line quality caused a
communication error.

Try sending the fax again or try connecting the
machine to another telephone line. If the
problem continues, call the telephone company
and ask them to check your phone line.

Cover Open

Close all covers

The Upper Jam Clear Cover is not
completely closed.

Open the Upper Jam Clear Cover and then close
it again.

The ink cartridge cover is not
completely closed.

Firmly close the ink cartridge cover until it clicks.

Disconnected

The other person or other person's
fax machine stopped the call.

Try to send or receive again.

«
...
88
89
90
91
92
...
»

Summary of Contents for FAX-1355
































































































































Reviews:

No comments

Related manuals for FAX-1355

Brand: Happy Pages: 9

Brand: Janome Pages: 28

KING COBRA 1200 PRO

Brand: U.S. Products Pages: 56

Brand: U.S. Products Pages: 8

Brand: Windsor Pages: 22

Brand: Reliable Pages: 1

Mikasa MVH-200DA

Brand: MULTIQUIP Pages: 64

Brand: Dürkopp Adler Pages: 374

Brand: Oki Pages: 87

Brand: Kärcher Pages: 260

Brand: JUKI Pages: 135

LBH-1790A Series

Brand: JUKI Pages: 5

Brand: JUKI Pages: 33

Brand: AEG Pages: 30

Brand: Bosch Pages: 36

Brand: Windsor Pages: 33

Brand: Windsor Pages: 18

Brand: Windsor Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands