Brother FAX-1355 User Manual Download Page 38

Page: 38 / 127

Receive modes

You must choose a receive mode depending on the external devices and telephone services you
have on your line.

Choosing the Receive Mode

By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct mode.

To setup the Digital TAD, see page 47.

For more detailed information on the receive modes. See page 30.

FAX-1355 and FAX-1360

Receiving a Fax

Do you want to use the telephone features of your machine (if available) or
an external telephone or external telephone answering device connected on the
same line as the machine?

Yes

Fax Only

Manual

Yes

External TAD

Fax/Tel

Are you using the voice message function of
an external telephone answering device?

Do you want the machine to answer fax and
telephone calls automatically?

Yes

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands