Brother FAX-1355 User Manual Download Page 59

Page: 59 / 127

Digital TAD (FAX-1460 and FAX-1560)

Printing fax messages

Once you print a new fax message stored in
memory it will automatically be erased from
the memory.

Press

Play/Record

Play

. After two

seconds, the fax machine begins to play
voice messages.

If Fax Storage is on, and there are fax
messages in memory, the LCD displays
the following:

Print Fax?

1.Yes 2.No

Do one of the following:

Press

to print your faxes.

Press

to exit without printing.

Erasing incoming messages

To erase voice messages individually

Press

Play/Record

Play

The machine will sound a two second
beep and begins message playback.
Each message is preceded by one long
beep, and followed by two short beeps.

To erase a specific message, press

Erase

immediately after the two short

beeps, or while the message is playing.

Do one of the following:

Erase this Msg.?

1.Yes 2.No

Press

to erase the message.

Press

to exit without erasing.

Press

Stop/Exit

To erase all of your messages

Press

Erase

Press

to choose one of the

options below. Then press

Do one of the following:

Press

to erase all of your

messages.

Press

to cancel.

Press

Stop/Exit

Erase All Voice?

All voice message

Erase All Doc?

All fax messages

Erase All Msg.?

All voice and fax
message

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands