Brother FAX-1355 User Manual Download Page 17

Page: 17 / 127

Loading documents

You can send a fax and make copies from the
ADF (automatic document feeder).

Using the ADF

The ADF can hold up to 20 pages and feeds
each sheet individually. Use standard
80 g/m

(20 lb) paper and always fan the

pages before putting them in the ADF.

Recommended environment

Document Sizes Supported

How to load documents

CAUTION

DO NOT pull on the document while it is
feeding.

DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.

DO NOT use cardboard, newspaper or
fabric.

Make sure documents written with ink are
completely dry.

Open the document support (1) and the
document tray (2) and then pull out the
extension (3).

Fan the pages well. Make sure you put
the documents

face down, top edge

first

in the ADF until you feel them touch

the feed roller.

Adjust the paper guides (1) to fit the
width of your documents.

Loading documents and paper

Temperature:

20 to 30

C (68 to 86

Humidity:

50% to 70%

Paper:

80 g/m

A4 (20 lb LTR)

Length:

127 to 355.6 mm (5 to 14 in.)

Width:

89 to 215.9 mm
(3.5 to 8.5 in.)

Weight:

64 to 90 g/m

(17 to 24 lb)

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands