manualshive.com logo in svg

Brother FAX-1355, User Manual

The Brother FAX-1355 Quick Setup Manual is a must-have resource for effortless setup of this reliable fax machine. Easily download the manual for free from our website, ensuring a smooth installation process. With clear instructions and detailed illustrations, you'll have your FAX-1355 up and running in no time.

Share
Download
background image

Troubleshooting and Routine Maintenance

79

Sending Faxes

Difficulty

Suggestions

Cannot send a fax

Check all line cord connections. 

Make sure that the Fax 

 key is illuminated. (See 

Entering Fax 

mode

on page 22.)

Ask the other party to check that the receiving machine has paper.

Print the Transmission Verification Report and check for an error. (See 

Reports

on page 58.)

Make sure the panel cover is completely closed.

Transmission Verification Report 
says ‘Result:NG’ or 
‘Result:ERROR’.

There is probably temporary noise or static on the line. Try sending the fax again. 
If the problem continues, ask the telephone company to check your phone line.

If you often get transmission errors due to possible interference on the phone line, 
try changing the menu setting of Compatibility to 

Basic

. (See 

Phone line 

interference

on page 86.)

If you connect your machine to PBX or ISDN, set the Phone Line Type in the menu 
settings. (See 

Setting the Phone Line Type

on page 37.)

Poor fax send quality.

Try changing your resolution to 

Fine

 or 

S.Fine

. Make a copy to check your 

machine's scanner operation. If the copy quality is not good, clean the scanner. 
(See 

Cleaning the scanner

on page 89.)

Vertical black lines when sending.

If the copy you made shows the same problem, clean the scanner. (See 

Cleaning 

the scanner

on page 89.)

Handling Incoming Calls

Difficulty

Suggestions

The machine ‘Hears’ a voice as a 
CNG Tone.

If Fax Detect is set to on, your machine is more sensitive to sounds. It may 
mistakenly interpret certain voices or music on the line as a fax machine calling 
and respond with fax receiving tones. Deactivate the machine by pressing 

Stop/Exit

. Try avoiding this problem by turning Fax Detect to off. (See 

Fax 

Detect

on page 31.)

Sending a fax call to the machine.

If you answered at the machine, press 

Start

 and hang up at once. If you answered 

on an external or extension phone, press your Fax Receive Code (default setting 
is 

l

51). When your machine answers, hang up.

Custom features on a single line.

If you have Call Waiting, Call Waiting/Caller ID, an alarm system or other custom 
feature on a single phone line with your machine, it may create a problem sending 
or receiving faxes.

For example:

 If you subscribe to Call Waiting or some other custom service and 

its signal comes through the line while your machine is sending or receiving a fax, 
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM feature 
should help overcome this problem. This condition is related to the telephone 
system industry and is common to all devices that send and receive information on 
a single, shared line with custom features. If avoiding a slight interruption is crucial 
to your business, a separate phone line with no custom features is recommended.

Menu Setting Difficulty

Difficulty

Suggestions

The machine beeps when you try to 
access the Setup Receive menu.

If the Fax 

 key is not illuminated, press it to turn on Fax mode. The Setup 

Receive setting is available only when the machine is in Fax mode.

Summary of Contents for FAX-1355
































































































































Reviews:

No comments

Related manuals for FAX-1355

Panasonic KX-TG9120E Quick Manual preview
KX-TG9120E
Brand: Panasonic Pages: 8
ayerbe ELECTRIC CUT OFF MACHINE 355 MM Manual preview
ELECTRIC CUT OFF MACHINE 355 MM
Brand: ayerbe Pages: 12
Toyota ESM21 Instruction Manual preview
ESM21
Brand: Toyota Pages: 55
Consew 223R-2 Parts List & Operating Instructions preview
223R-2
Brand: Consew Pages: 38
Dixie Narco SIID Operation And Service Manual preview
SIID
Brand: Dixie Narco Pages: 14
Tennant ReadySpace 1610 Manual preview
ReadySpace 1610
Brand: Tennant Pages: 2
Rollabind PBS 2000 Operating Instructions preview
PBS 2000
Brand: Rollabind Pages: 2
Parkeon WAYFARER 6 Service Manual preview
WAYFARER 6
Brand: Parkeon Pages: 127
Duerkopp Adler 743-420 Spare Parts preview
743-420
Brand: Duerkopp Adler Pages: 84
Mybelle 109 LIPS User Manual preview
109 LIPS
Brand: Mybelle Pages: 4
Duerkopp Adler 4181i-3 Instruction Manual preview
4181i-3
Brand: Duerkopp Adler Pages: 38
JUKI PLC-2760NVM Instruction Manual preview
PLC-2760NVM
Brand: JUKI Pages: 42
Janome MC6600 Service Manual preview
MC6600
Brand: Janome Pages: 49
JUKI HZL-F series Instruction Manual preview
HZL-F series
Brand: JUKI Pages: 168
Brother DH4-B980 Instruction Manual preview
DH4-B980
Brand: Brother Pages: 66
Brother EF4-B641 Parts Manual preview
EF4-B641
Brand: Brother Pages: 56
Brother DB2-B797 Specifications preview
DB2-B797
Brand: Brother Pages: 2
Brother DB2-B797 Instruction Manual preview
DB2-B797
Brand: Brother Pages: 28

Brands by name

Popular brands

Load more brands