Brother FAX-1355 User Manual Download Page 27

Page: 27 / 127

TX Lock

(FAX-1355 and
FAX-1360)

TX Lock lets you prevent unauthorized
access to the machine.

You will not be able to schedule Delayed
Faxes or Polling jobs. However, any
pre-scheduled Delayed Faxes will be sent
even if you turn on TX Lock so they will not be
lost.

While TX Lock is On, the following operations
are available:

Receiving faxes

Receiving calls (FAX-1360)

Fax Forwarding
(If Fax Forwarding was already On)

Remote retrieval
(If Fax Storage was already On)

While TX Lock is On, the following operations
are NOT available:

Sending faxes

Copying

Note

If you forget the TX Lock password,
please call your Brother dealer for service.

Setting and changing the
TX Lock password

Note

If you have already set the password, you
will not need to set it again.

Setting the password

Press

Menu

Enter the 4-digit number for the
password.
Press

When the LCD shows

Verify:

re-enter

the password.
Press

Press

Stop/Exit

Changing the TX Lock password

Press

Menu

Press

to choose

Set Password

Press

Enter a 4-digit number for the current
password.
Press

Enter a 4-digit number for the new
password.
Press

When the LCD shows

Verify:

re-enter

the password.
Press

Press

Stop/Exit

Security features

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands