Brother 882-W04 Operation Manual Download Page 226

Page: 226 / 376

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)

224

Selecting a Pattern

Patterns combining embroidery and printed
designs can be selected from the pages that

contain

. Select the desired pattern.

Press the key of the pattern you want to
embroider.

→

An image of the pattern combined with the
background appears.

■

Checking Only the Embroidery

Pattern

Press .

→

Only the embroidery pattern (not the background
image of the selected embroidery pattern) is
displayed.

To return to the image of the pattern combined with

the background, press

Memo

• Refer to the Quick Reference Guide for the

detail of patterns which enable this function.

Summary of Contents for 882-W04

























































































































































































































































































































































































Search results

Summary of Contents for 882-W04

Reviews:

Related manuals for 882-W04

Brands by name

Popular brands

Brother 882-W04, Operation Manual

Search results

Summary of Contents for 882-W04

Reviews:

Related manuals for 882-W04

Brands by name

Popular brands