manualshive.com logo in svg

Brother 1660e - B/W Laser Printer, User Manual

Share
Download
Brother 1660e - B/W Laser Printer User Manual Download Page 87

USER’S GUIDE

4–20

FORMAT MODE

ORIENTATION

When you select “ORIENTATION”, you can set portrait or landscape
orientation.

✒

 Note

The ORIENTATION selection is effective in the HP LaserJet 4+, EPSON
FX-850, and IBM Proprinter XL modes. It does not work in other emulation
modes.

This printer can print pages in portrait or landscape orientation. You can
check the current orientation on the display.

Fig. 4-4  Page Orientation

When you enter the setting mode, the display first shows the current
orientation with an asterisk.

ORI=PORTRAIT   *

Press the 

▲

 or 

▼

 switch until the desired orientation appears on the

display.

Display Message

Orientation

ORI=PORTRAIT

Portrait

ORI=LANDSCAPE

Landscape

Press the SET switch to make the displayed selection effective.

An asterisk appears at the end of the display for a short time. Then the
printer automatically exits from the setting mode to the FORMAT
MODE.

PORTRAIT

LANDSCAPE

Summary of Contents for 1660e - B/W Laser Printer
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands