manualshive.com logo in svg

Brother 1660e - B/W Laser Printer, User Manual

Share
Download
Brother 1660e - B/W Laser Printer User Manual Download Page 22

USER’S GUIDE

1–6

Automatic Emulation Selection

This printer can automatically select the printer emulation mode depending
on the print commands it receives from the computer software. With this
feature, many users can share the printer on a network. See page 

3-3

.

Data Compression Technology

This printer can internally compress the received graphics and font data in
its memory so that it can print larger graphics and more fonts without
additional memory.

Memory Expansion

This printer has 2-Mbyte or 4-Mbyte of RAM as standard. It can be
expanded up to 66 Mbytes. The memory should be expanded to 6 Mbytes in
total or more to enjoy 600-dpi or APT printouts in the BR-Script 2 mode.
When you select duplex mode with an optional duplex unit installed, the
memory should be expanded to 10Mbytes in total or more to enjoy 600-dpi
duplex printing. See pages 

4-28

 and 

5-7

. (The standard memory fitted can

vary depending on the printer model and country.)

  

75 Scalable and 12 Bitmapped Fonts

This printer has the following scalable fonts and bitmapped fonts. The fonts
that can be used vary according to the current emulation mode.

■

HP LaserJet 4+, EPSON FX-850, and IBM Proprinter XL Modes  See 
printed Appendix after Chapter 7.

Scalable Fonts:

Intellifont Compatible Fonts:
• Alaska, Extrabold
• Antique Oakland, Oblique, Bold
• Brougham, Oblique, Bold, BoldOblique
• Cleveland Condensed
• Connecticut
• Guatemala Antique, Italic, Bold, BoldItalic
• Letter Gothic, Oblique, Bold
• Maryland
• Oklahoma, Oblique, Bold, BoldOblique
• PC Brussels Light, LightItalic, Demi, DemiItalic
• PC Tennessee Roman, Italic, Bold, BoldItalic
• Utah, Oblique, Bold, BoldOblique
• Utah Condensed, Oblique, Bold, BoldOblique

Summary of Contents for 1660e - B/W Laser Printer
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands