manualshive.com logo in svg

Brother 1660e - B/W Laser Printer, User Manual

Share
Download
Brother 1660e - B/W Laser Printer User Manual Download Page 135

USER’S GUIDE

4–68

■

BR-Script 2 Mode

BR-Script is a Brother original page description language and it is a
PostScript

®

 language emulation interpreter. This printer supports level 2.

The BR-Script interpreter of this printer can control text and graphics on
pages completely and satisfactorily.

Average users do not need to know much about PostScript

®

 language. If

you want to obtain technical information about PostScript

®

 commands, see

the following commercial manuals:

  • Adobe Systems Incorporated. PostScript

®

 Language Reference

Manual, 2nd Edition. Menlo Park: Addison-Wesley Publishing
Company, Inc., 1990.

  • Adobe Systems Incorporated. PostScript

®

 Language Program Design.

Menlo Park: Addison-Wesley Publishing Company, Inc., 1988.

  • Adobe Systems Incorporated. PostScript

®

 Language Reference

Manual. Menlo Park: Addison-Wesley Publishing Company, Inc., 1985.

  • Adobe Systems Incorporated. PostScript

®

 Language Tutorial and

Cookbook. Menlo Park: Addison-Wesley Publishing Company, Inc.,
1985.

■

HP-GL Mode

The HP-GL mode is the emulation mode where this printer emulates the
Hewlett-Packard plotter model HP-7475A. Since many graphics and CAD
applications support this type of plotter, you can get more out of this printer
working with your application software.

■ 

EPSON FX-850 and IBM Proprinter XL Mode

The EPSON FX-850 and IBM Proprinter XL modes are the emulation
modes where this printer emulates the industry-standard dot matrix printers
of respective manufacturers. Since most applications support these printers,
you do not have to be concerned about compatibility.

Summary of Contents for 1660e - B/W Laser Printer
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands