Brother 1660e - B/W Laser Printer, User Manual

Page: 263 / 271

APPENDICES
Appendix–69
■
Bar Code, Expanded Character, Line Block Drawing & Box Drawing
Offset in X-axis
n = “xnnn” or “Xnnn”
This parameter specifies the offset from the left margin in the “u”- or
“U”-specified unit.
■
Bar Code & Expanded Character Offset in Y-axis
n = “ynnn” or “Ynnn”
This parameter specifies the downward offset from the current print
position in the “u”- or “U”-specified unit.
■
Bar Code, Expanded Character, Line Block Drawing & Box Drawing
Height
n = “hnnn”, “Hnnn”, “dnnn”, or “Dnnn”
(1) EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A),
ISBN (UPC-E):
22 mm
(2) UPC-E: 18 mm
(3) Others: 12 mm
Expanded characters
➞
2.2 mm (default)
Line Block Drawing & Box Drawing
➞
1 dot
This parameter specifies the height of bar codes or expanded characters
as above. It can take the prefix “h”, “H”, “d”, or “D”. The height of bar
codes is specified in the “u”- or “U”-specified unit. Note that the default
setting of the bar code height (12 mm, 18 mm or 22 mm) is subject to the
bar code mode selected by “t” or “T”.
■
Expanded Character Width, Line Block Drawing & Box Drawing
n = “wnnn” or “Wnnn”
Expanded character
➞
1.2 mm
Line Block Drawing & Box Drawing
➞
1 dot
This parameter specifies the width of expanded characters as above.