X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
sensor 28: (Temperature) is Ok, value is 52 C
sensor 29: (Temperature) is Ok, value is 47 C
sensor 30: (Temperature) is Ok, value is 42 C
sensor 31: (Temperature) is Ok, value is 31 C
sensor 32: (Temperature) is Ok, value is 54 C
sensor 33: (Temperature) is Ok, value is 29 C
sensor 34: (Temperature) is Ok, value is 30 C
sensor 35: (Temperature) is Ok, value is 41 C
sensor 36: (Temperature) is Ok, value is 48 C
sensor 37: (Temperature) is Ok, value is 29 C
sensor 38: (Temperature) is Ok, value is 30 C
sensor 39: (Temperature) is Ok, value is 40 C
sensor 40: (Temperature) is Ok, value is 45 C
sensor 41: (Temperature) is Ok, value is 29 C
sensor 42: (Temperature) is Ok, value is 30 C
sensor 43: (Temperature) is Ok, value is 43 C
sensor 44: (Temperature) is Ok, value is 49 C
sensor 45: (Fan ) is Ok,speed is 7509 RPM
sensor 46: (Fan ) is Ok,speed is 7462 RPM
sensor 47: (Fan ) is Ok,speed is 7444 RPM
sensor 48: (Power Supply) is Ok
sensor 49: (Power Supply) is Ok
sensor 50: (Power Supply) is Ok
sensor 51: (Power Supply) is Ok
sfpShow
Use the
sfpShow
command without operands to display a summary of all installed SFPs. For each port, the command
displays the SFP type and, for a serial ID SFP, the vendor name and SFP, serial number, and speed capability (in Gb/s).
Use this command with a port number to display detailed information about the serial ID SFP in the specified port.
The following is example of
sfpShow
output:
chassisX7-8:admin> sfpshow
Slot 3/Port 0: --
Slot 3/Port 1: --
Slot 3/Port 2: --
Slot 3/Port 3: --
Slot 3/Port 4: --
Slot 3/Port 5: --
Slot 3/Port 6: --
Slot 3/Port 7: --
Slot 3/Port 8: --
Slot 3/Port 9: --
Slot 3/Port 10: --
Slot 3/Port 11: --
Slot 3/Port 12: --
Slot 3/Port 13: --
Slot 3/Port 14: --
Slot 3/Port 15: --
Slot 4/Port 0: --
Slot 4/Port 1: --
X7-8-Install-IG100
96
Broadcom
Summary of Contents for Brocade X7-8
Page 212: ......
