X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Figure 31: WWN Card LEDs on Bezel
1. Power LED for WWN Card 1
2. Status LED for WWN Card 1
3. Power LED for WWN Card 2
4. Status LED for WWN Card 2
Table 20: WWN Card LED Descriptions
LED Purpose
Color
Status
Recommended Action
No light (LED is off)
The card is not receiving power. Ensure that device power
supplies are firmly seated,
power cables are connected,
and cables are connected to a
power source.
Power
Steady green
The card is receiving power.
No action required.
No light (LED is off)
The card is either healthy or
does not have power.
No action required.
Status
Steady amber
The card is faulty.
Replace card.
Interpreting Power Supply LEDs
See the following information to interpret the LED patterns on the power supply. The LED patterns may temporarily
change during POST and other diagnostic tests. The Brocade X7-8 Director can have up to four power supplies.
Figure 32: AC Power Supply LED
1. Power Status LED
X7-8-Install-IG100
86
Broadcom
Summary of Contents for Brocade X7-8
Page 212: ......
