X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6
IPv6 Autoconfiguration Enabled: Yes
Local IPv6 Addresses:
chassis 0 stateless fd00:60:69bc:63:205:1eff:fe39:e45a/64 preferred
chassis 0 stateless fec0:60:69bc:63:205:1eff:fe39:e45a/64 preferred
cp 0 stateless fd00:60:69bc:63:205:1eff:fe40:6230/64 preferred
cp 0 stateless fec0:60:69bc:63:205:1eff:fe40:6230/64 preferred
cp 1 stateless fd00:60:69bc:63:205:1eff:fe39:ff2a/64 preferred
cp 1 stateless fec0:60:69bc:63:205:1eff:fe39:ff2a/64 preferred
IPv6 Gateways:
cp 0 fe80:60:69bc:63::3
cp 0 fe80:60:69bc:63::1
cp 0 fe80:60:69bc:63::2
cp 1 fe80:60:69bc:63::1
cp 1 fe80:60:69bc:63::2
cp 1 fe80:60:69bc:63::3
5. Display and record the manufacturer serial numbers.
Enter
chassisShow
, and then copy the command output into the
config-miscinfo.txt
file.
"Factory Serial Num" and "Serial Num" are listed under "Chassis/WWN Unit 1" and "Chassis/WWN Unit 2". If the
current WWN cards are the original cards, the factory serial number listed is the same as the chassis serial number.
6. Create a SAN profile by entering and recording the information provided by the following commands:
•
fabricShow
•
nsAllShow
•
nsShow
•
switchShow -qsfp
Copy the command output into a text file named "SANbefor.txt." After the device is restored to the fabric, this
information can be used to verify that no unintentional changes have occurred to the fabric.
switch:admin> nsshow
Enter Pid COS PortName NodeName TTL
<output truncated>
switch:admin> nsallshow
12 Nx_Ports in the Fabric
<output truncated>
switch:admin> switchshow
switchName: switch
<output truncated>
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
<output truncated>
switch:admin>
7. Enter
licenseShow
, and then copy the command output into a text file named
licenseshow.txt
.
Core-X7-8_Upgraded:admin> license --show
License Id : 10:00:00:27:f8:f2:76:f8
License 1 :
-------------------------------------------------------------
X7-8-Install-IG100
191
Broadcom
Summary of Contents for Brocade X7-8
Page 212: ......
