X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Figure 28: FC32-64 Port Blade LEDs
1. Blade Power LED
2. Blade Status LED
3. Status LEDs for QSFP+ Ports
The following table describes the blade LED patterns and the recommended actions for those patterns.
NOTE
When the QSFP is operating in breakout mode, each of the four LEDs to the right of the QSFP quad port
indicates the status of an individual breakout port. When the QSFP is operating in nonbreakout mode (Ethernet
QSFPs only), the primary port LED (top LED) indicates the status of the single, unified QSFP port. For
example, for a 40GbE QSFP in breakout mode, each of the four LEDs indicates the status of a 10GbE port. In
nonbreakout mode, the primary (top) LED indicates the status of the unified 40GbE port.
The following table describes the blade LED patterns and the recommended actions for those patterns.
X7-8-Install-IG100
77
Broadcom
Summary of Contents for Brocade X7-8
Page 212: ......
